#2 Morse taper for Drill Chuck (Chuck Sold Separately)

#2 Morse taper for Drill Chuck (Chuck Sold Separately) Reviews

Other Picture

1/2" drill chuck for lathe is compatible with two choices of morse tapers. Use it with either the #1 Morse taper (Rockler #20785) or #2 Morse taper (Rockler #20793) to assemble as shown. Key is supplied with chuck. This assembly is used on a lathe to hold a mandrel for turning wood pens and pencils.

Visit Store Now !!

Detail Products

• 1/2'' Drill Chuck (Morse Tapers Sold Separately)
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
• Wolverine Grinding Jig
• PSI Woodworking CJAWFJ2 Jumbo Flat Jaws

Detail Reviews

Jun 30, 2011 19:16:05

Superior Electric SE-06-75-3150 1/4-20 x 1 Socket Screw - Left Hand Thread

Superior Electric SE-06-75-3150 1/4-20 x 1 Socket Screw - Left Hand Thread Reviews

Other Picture

Superior Electric SE-06-75-3150 1/4-20 x 1 Socket Screw - Left Hand Thread Feature

• Easy entry
• Minimal damage
• Superior holding

Superior Electric SE-06-75-3150 Left Hand screw with socket head - 1/4-20 threads x 1 Inch long. Its design has several unique features which make it a superior screw for easy use.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 29, 2011 15:25:04

Sorby Micro Sandmaster Head Only

Sorby Micro Sandmaster Head Only Reviews

Other Picture

Sorby Micro Sandmaster Head Only Feature

• An extremely handy addition to any turner's armory
• The Sandmaster is used in conjunction with a lathe to put a fine finish on turned pieces.
• Spinning disc reduces the clogging of the abrasive

Head only for the Sorby Micro Sandmaster

Visit Store Now !!

Detail Products

Detail Reviews

Jun 28, 2011 12:13:05

Cut-off tool rear mounting block

Cut-off tool rear mounting block Reviews

Other Picture

Cut-off tool rear mounting block Feature

• Mounts P/N 3002 cut-off tool holder on rear side of table with tool held upside down
• Stays out of the way and instantly ready for parting operations
• Includes longer hold-down bolt

Mounting the cut-off tool to the rear side of the part allows the tool to be left in place at all times. It is out of the way but ready to bring into use at any time without having to remove the standard tool post and mount the cut-off tool holder. When mounting it on the back side, the tool is mounted upside down to account for the fact that the part rotation direction is opposite on the back side. A longer bolt is provided for mounting the existing 3002 cut-off tool holder on top of this spacer block. Designed for use with Sherline tools only.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 27, 2011 13:33:03

SUPERNOVA 2 CHUCK WITH 4 JAW SETS AND ACC

SUPERNOVA 2 CHUCK WITH 4 JAW SETS AND ACC Reviews

Other Picture

SUPERNOVA 2 CHUCK WITH 4 JAW SETS AND ACC Feature

• 4" Self Centering Woodlathe Chuck w/4 Jaw Sets
• Includes Supernova 2 chuck with 2" jaws, woodworm screw
• Also includes 1' dovetail jaws, 45mm spigot jaws, and 10" Cole Jaws
• Holds in both contraction and expansion modes
• ADAPTER INSERT MUST BE ORDERED SEPARATELY

Why this combination? The 2" jaws are a given (they come with the chuck!). 1" dovetails jaw are extremely useful for small turnings (Christmas tree ornaments etc). The Cole Jaws are our most popular selling jaw - designed for refinishing the bottom of a bowl up to 10". The 45mm Spigot jaws (my personal favorite) are just the ticket for long unsupported (i.e. no tail stock) spindle work - goblets, candle holders, etc. This is a great starter package - these are probably jaws you will buy eventually - buy them with the chuck and save!

Visit Store Now !!

Detail Products

• 1-1/4"-8 TPI RH Insert
• 1'-8 TPI Insert for Nova chucks
• PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center
• Tauntons Complete Illustrated Guide To Turning
• PSI Woodworking DBGULP Big Gulp Dust Hood

Detail Reviews

Jun 26, 2011 18:16:04

Robert Sorby #970 Sizing Tool

Robert Sorby #970 Sizing Tool Reviews

Other Picture

Used with a parting tool to obtain accurate and consistent turning diameters up to 3" on spindle work. Works with Sorby's 1/4" Standard Parting Tool and 3/8" Beading & Parting Tool. Parting Tools sold separately. Sizing Tool locks firmly in place with 2 thumb screws. Made in England.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 25, 2011 09:13:04

Peachtree Woodworking 3/4 X 3/4 X 5 ACRYLIC PEN BLANK BLUE BANANA

Peachtree Woodworking 3/4 X 3/4 X 5 ACRYLIC PEN BLANK BLUE BANANA Reviews

Other Picture

Peachtree Woodworking 3/4 X 3/4 X 5 ACRYLIC PEN BLANK BLUE BANANA Feature

• Blanks measure 3/4" x 3/4" x 5"
• Turns and drill easily
• Polish to super high gloss, no top coat needed

These acrylic blanks are undrilled, 3/4" x 3/4" square x 5" long. The blanks are high density with great working properties and polish to a super high gloss. Acrylic blanks take a beautiful polish that gives the appearance of a liquid tube. No top coat finish is necessary.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 24, 2011 13:22:04

Hollow Roller Adaptor Stud 1-1/8"

Hollow Roller Adaptor Stud 1-1/8" Reviews

Other Picture

Hollow Roller Adaptor Stud 1-1/8" Feature

• Great for beginners and experts
• Totally captive system
• Multifunctional
• Adapter stud used for most lathes with a banjo diameter of 1-1/8"

The Hollow Roller is a captive bar system created for turning hollow forms and vessels, designed to be used by the beginner and accomplished turner alike. The flat on one side of the bar holds the tool completely captive, allowing the turner to focus on the turning rather than worrying about the tool catching and/or twisting in use. The integrated roller system reduces drag on the bar for better control, and feel, while making any hollowing cut. Hollow Roller easily attaches to almost any size lathe, but must be purchased with the appropriate size adaptor stud, sold separately below. The Carter Hollow Roller has a 17-1/2" handle, 21-1/4" blade with high-speed steel cutter, captive roller system, and steady rest.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 23, 2011 17:12:39

Long Tool Handle

Long Tool Handle Reviews

Other Picture

Long Tool Handle Feature

• comfortable plastic grip
• accepts 1/2" and 5/8" diameter tools
• can be adapted down to 3/8" or up to 3/4"
• solid constructrion
• exception balance and feel

Our heavy duty steel handles are covered in thick plastic for an extremely confortable feel. Two set screws clamp the tool rigidly in place. Each handle has a ½" hole at one end, and a â" hole at the opposite end. Handles have the capacity to be coupled together to make extra long handles for those special turning applications which demand a totally solid handle. These heavyweight handles help to absorb vibration during heavy roughing cuts and add stability for fine finishing cuts. Handles are comfortable to hold and are warmer in the winter to work with than bare steel or aluminum handles.

Visit Store Now !!

Detail Products

• 3/8 Tool Handle Adaptor
• Wolverine Vari-Grind Attachment
• 5/8" Mastercut Bowl Gouge
• Short Tool Handle
• Ellsworth on Woodturning: How a Master Creates Bowls, Pots, and Vessels

Detail Reviews

Jun 22, 2011 20:43:04

3/16'' Robert Sorby #831H Diamond Parting Tool

3/16'' Robert Sorby #831H Diamond Parting Tool Reviews

Other Picture

The special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction, thereby lessening the chance of burning the bottom of the parted project. Size: 3/11''-5mm. Code: 831H. Overall length: 17''. Handle length:10''.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 20, 2011 12:31:04

JET Tooling Kit for 13in. & 14in.W Series and Bench Series Lathes - 22-Pc. Set, Model# 660200

JET Tooling Kit for 13in. & 14in.W Series and Bench Series Lathes - 22-Pc. Set, Model# 660200 Reviews

Other Picture

JET Tooling Kit for 13in. & 14in.W Series and Bench Series Lathes - 22-Pc. Set, Model# 660200 Feature

• 3 double-ended boring bars
• Parting tool holder
• Adjustable turning tool holder
• Revolving knurling tool
• Half dead center

Essential tools designed to be used with JET 13in. & 14in.W Series and Bench Series lathes (including Item# 143353). Ideal kit to use with your lathe for all your metal turning projects. Stand Included: No

Visit Store Now !!

Detail Products

Detail Reviews

Jun 19, 2011 08:28:03

1'' Robert Sorby #820H Round Nose Scraper

1'' Robert Sorby #820H Round Nose Scraper Reviews

Other Picture

1'' Robert Sorby #820H Round Nose Scraper Feature

• Round Nose Scraper
• Size: 1'' - 25mm
• Overall Length: 18-1/2''
• Handle Length: 12''
• Code: 820H

Use on bowls and spindle work to create smooth flowing curves. Perfect for goblets, egg cups, and inside boxes.
Size: 1" - 25mm.
Code: 820H.
Overall Length: 18-1/2".
Handle Length: 12".

Visit Store Now !!

Detail Products

Detail Reviews

Jun 18, 2011 12:23:03

Royal Products 43404 1/8" to 3-1/2" Bar Capacity Heavy Duty Bar Puller With 1-1/4" Round Shank

Royal Products 43404 1/8" to 3-1/2" Bar Capacity Heavy Duty Bar Puller With 1-1/4" Round Shank Reviews

Other Picture

Royal Products 43404 1/8" to 3-1/2" Bar Capacity Heavy Duty Bar Puller With 1-1/4" Round Shank Feature

• Rugged, heavy-duty design withstands the toughest manufacturing environments
• Large internal die springs provide very strong gripping force
• All parts subject to wear are hardened for strength and durability
• 1 year warranty against failure due to manufacturing defects

Bar pullers provide a cost effective way to automate CNC lathes. Unit is very easy to use. Simply set gap between jaws 1⁄8" smaller than stock size. As the bar puller slides over the bar along the x-axis, the fingers flex to provide the gripping force. The turret then retracts along the z axis, pulling the bar out the desired position. Pre-load on internal die springs can be adjusted to fine tune the grip force. Includes one set of standard jaws and one blank spindle bushing. Extra capacity jaws sold separately.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 16, 2011 08:03:04

2'' 240 Grit Sandpaper for the Sorby Sandmaster, 10pk

2'' 240 Grit Sandpaper for the Sorby Sandmaster, 10pk Reviews

Other Picture

Replacement hook and loop sandpaper for the Sorby Sandmaster (shown, sold separately, Rockler #27711). Available in 2" and 3" diameters and 60, 180, 240 and 400 grit papers. Note: The Sorby Sandmaster comes with a 2" standard head. Optional 3" head sold separately (Rockler #26888).

Visit Store Now !!

Detail Products

Detail Reviews

Jun 15, 2011 06:52:04

Jaws, #3

Jaws, #3 Reviews

Other Picture

Jaws, #3 Feature

• Grips round or square stock from 3-1/2" to 5-1/2" in diameter
• Expands into dovetail recesses from 4-1/2" to 6" in diameter
• Fits Oneway Stronghold chuck

Oneway Stronghold #3 Jaws for bowls, vessels and platters. Designed for strength, these jaws are built to handle "large" turnings. Grips round or square stock from 3-1/2" to 5-1/2" in diameter, or expands into dovetail recesses from 4-1/2" to 6" in diameter.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 14, 2011 10:16:04

Replacement HSS Cutter, For Midi

Replacement HSS Cutter, For Midi Reviews

Other Picture

Replacement HSS Cutter, For Midi Feature

• Great for turning matching table legs
• Designed to fit almost any midi or mini lathe
• Copies parts up to 10" long
• All Duplicator Controls are located for fast and easy operation
• After an initial set up of 1/2 hour, subsequent set ups take just minutes

For anyone who has to make more than a single turned object, duplicators are almost essential to a good job. Most tables, for example, look more professionally done when all the legs match. If youre making a production run of pens for advertising or other purposes, getting them as close to alike as possible, and doing the job as fast as possible, is important. VEGA duplicators remove stock faster than all but the most experienced woodworkers can, while keeping within very tight tolerances (if the workpiece is heavy enough to not deflect, up to 1/2" can be removed per pass). It works off a template, and can easily work off an original turning (with a 2" maximum turning diameter). Most small-scale lathe duplicating machines do not work well, are poorly made, and the cutters are cheap, often hard or impossible to sharpen, and difficult to replace. And the duplicators will fit only a single machine. VEGA has changed all that. Their three Lathe Duplicators cover mini and midi lathes, and full-sized lathes with swings up to 16". A narrow diamond shaped HSS cutter is included with each duplicator and replacement cutters are available. The Diamond V Kit adapts the duplicator to use solid carbide inserts for production situations where frequent sharpening of the cutter is necessary. Each insert is two-sided and replacement inserts are available. The Midi Duplicator is designed to fit almost any midi or mini lathe on the market and copies parts up to 10" long (there is a 24" version available, too). A nice feature of the Vega is that you retain the option to use hand tools to finish the work or to make changesthe Duplicator can either be removed, or mounted on the back of the lathe with the cutter upside down). Not illustrated.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 13, 2011 07:12:04

3/4 X 3/4 X 3" Cobalt Square Tool Bit

3/4 X 3/4 X 3" Cobalt Square Tool Bit Reviews

Other Picture

3/4 X 3/4 X 3" Cobalt Square Tool Bit Feature

• Width: 3/4"
• Height: 3/4"
• Length: 3"

Precision ground.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 12, 2011 12:10:03