Saturday, April 30, 2011

Taig 4 Jaw Self Centering chuck

Taig 4 Jaw Self Centering chuck Reviews


Other Picture


Taig 4 Jaw Self Centering chuck Feature

  • Brand new
  • 4 Jaw 3 1/4" dia. self centering scroll chuck (steel body) with aluminum soft jaws 3/4-16 thd.
  • A2Z is an Authorized Taig Dealer
4 Jaw 3 1/4" dia. self centering scroll chuck (steel body) with aluminum soft jaws 3/4-16 thd.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 30, 2011 23:13:03

Friday, April 29, 2011

Robust 6" Mini Rest with 5/8" Post

Robust 6" Mini Rest with 5/8" Post Reviews


Other Picture


Robust 6" Mini Rest with 5/8" Post Feature

  • Hardened Steel Rod
  • Smooth Tool Operation
  • Made in the USA
For use with most mid and mini lathes, these rests feature a 5/8" diameter x 2-3/4" long post.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 29, 2011 21:32:05

Thursday, April 28, 2011

PSI Woodworking CJAWFJ1 Small Flat Lathe Chuck Jaws

PSI Woodworking CJAWFJ1 Small Flat Lathe Chuck Jaws Reviews


Other Picture


PSI Woodworking CJAWFJ1 Small Flat Lathe Chuck Jaws Feature

  • Scroll lathe chuck designed for finishing bowl bottoms
  • Jaws open to accommodate a 5-inch bowl
  • Easy to adjust sizes with the 3-position peg system
  • Compatible with all the PSI Woodworking 'C' style chucks
  • Weighs 2 pounds shipped
The Barracuda scroll lathe chuck from PSI Woodworking has jaws that open to accommodate a 5-inch bowl, and it's designed to allow you to finish bowls so it's ideal for turning bowl bottoms. The Barracuda is easy to adjust, with a three-position peg system. The small, flat jaws are compatible with all the PSI Woodworking 'C' style chucks.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 29, 2011 01:23:03

Wednesday, April 27, 2011

Taig Radius Turner

Taig Radius Turner Reviews


Other Picture


Taig Radius Turner Feature

  • Brand new
  • Radius Turner, swings Tool Bit in arc
  • A2Z is an Authorized Taig Dealer
Radius Turner, swings Tool Bit in arc


Visit Store Now !!

Detail Products

Detail Reviews




Apr 28, 2011 01:43:03

Tuesday, April 26, 2011

Hunter #6 Carbide Replacement Cutter

Hunter #6 Carbide Replacement Cutter Reviews


Other Picture


Hunter #6 Carbide Replacement Cutter Feature

  • Unique Hunter design
  • High quality carbide tip
  • 25 - 30 times longer edge life than other similar tools
  • No Grinding or lapping needed
  • Simple to remove and replace
When the Hunter tool tip dulls, just loosen and rotate slightly to a new razor sharp section. No grinding or lapping of the cutter is needed. Use this replacement tip when worn completely out. These tips have a high edge life 25-30 times longer than similar tools.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 27, 2011 03:44:04

Monday, April 25, 2011

3.1" 3-Jaw Self-centering Chuck

3.1" 3-Jaw Self-centering Chuck Reviews


Other Picture


3.1" 3-Jaw Self-centering Chuck Feature

  • Hardened steel reversible jaws
  • Hold parts from 3/32 to 1-1/2 in regular position, to 2-3/4 with jaws reversed
  • Jaws scroll together when outer ring of chuck is turned for quick centering of material
  • ¾-16 thread fits Sherline spindles
  • Includes two spindle bars for adjustment
Self-centering chucks utilize a spiral scroll that causes all three jaws to close on the part at the same time when the outer ring of the chuck is turned in relation to the body. Round or hex material is centered quickly and easily. Runout (centering accuracy) is guaranteed to be .003" or less. Because of the number of moving parts, accuracy greater than this cannot be guaranteed with this type of chuck. If greater centering accuracy is needed, an "independent" jaw chuck where the jaws are adjusted one at a time might be needed. Self-centering chucks are the most popular because they offer quick centering and a high enough level of accuracy for most jobs. Reversable jaws are made from hardened steel. This large chuck will hold parts from 3/32" up to 1/1/2" with the jaws in the normal position. Reversing the jaws allows parts up to 2-3/4" to be held. Two steel spindle bars (sometimes called "Tommy" bars are included to tighten the chuck. For use with Sherline machine tools.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 26, 2011 07:33:03

Sunday, April 24, 2011

Crown Thread Chasing Recess Tool

Crown Thread Chasing Recess Tool Reviews


Other Picture


Crown Thread Chasing Recess Tool Feature

  • Apply threads quickly and easily
  • Learn from Legendary turner Bill Jones
When hand chasing female threads, a small recess must be cut at the bottom of the threads to allow lifting the chaser without damaging the threads. This scraper quickly and cleanly cuts a perfect recess while leaving a clean groove that is unnoticeable in your finished project.

The art of thread chasing is still the quickest and easiest way to apply threads to your wood turning projects. With a little practice, along with the included instructions from Legendary English turner Bill Jones, you can quickly learn to cut threads on boxes or center work. Three tools are required to chase threads, #1 an outside and inside chaser tools, #2 a thread chaser recess tool and #3 a lathe that can be slowed down to 100 - 300 rpms. When hand chasing female threads, a small recess must be cut at the bottom of the threads to allow lifting the chaser without damaging the threads. This scraper quickly and cleanly cuts a perfect recess while leaving a clean groove that is unnoticeable in your finished project. Thread chasers work best in dense hardwoods and are sold as a set (one inside and one outside chaser). 5 handles, approximately 10 overall length.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 25, 2011 08:49:03

Saturday, April 23, 2011

.059" TIN Groove+ Cut-Off Insert. Nikcole Mini grooving system.

.059" TIN Groove+ Cut-Off Insert. Nikcole Mini grooving system. Reviews


Other Picture


.059" TIN Groove+ Cut-Off Insert. Nikcole Mini grooving system. Feature

  • W: 0.059
  • T: 0.235
Nickole mini-groove system. GIE series inserts. Tolerance: +.0009" - .0000


Visit Store Now !!

Detail Products

Detail Reviews




Apr 23, 2011 19:14:04

Friday, April 22, 2011

Crown 5-Piece Mini Turning Tool Set

Crown 5-Piece Mini Turning Tool Set Reviews


Other Picture


Create beautiful pens and similar projects with this Crown Mini Turning Set. With five of the most popular turning tools, this set is perfect for the beginning woodturner. Tools are pre-honed for immediate use. All are made of high speed steel to hold an edge and last longer.Set includes:* 1/8" Gouge* 1/4" Gouge* 1/16" Parting tool* 1/4" Round nose scraper* 1/4" Skew chisel


Visit Store Now !!

Detail Products

Detail Reviews




Apr 23, 2011 00:09:04

Thursday, April 21, 2011

Robert Sorby #89HS16 Thread Cutting Set - 16TPI

Robert Sorby #89HS16 Thread Cutting Set - 16TPI Reviews


Other Picture


This starter package will give you a great foundation for learning to cut threads on turned objects. Thread cutting tools are primarily used to make lidded boxes, but can be used to make other threaded turnings as well. The tools have a unique enhanced helix angle design specifically for use in wood, so you can be assured of smooth and precise results. The Thread Cutters come as a pair that will cut both the male and female threads. Thread Cutters have HSS blades and ash handles. Made in England. Thread Cutting Set: Includes a pair of Thread Cutters; Thread & Sizing Gauge; and the "Focus on Thread Cutting" DVD.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 22, 2011 03:07:06

Wednesday, April 20, 2011

Royal Products 44002 A2-5 Spindle To 170 mm Chuck Adapter Plate

Royal Products 44002 A2-5 Spindle To 170 mm Chuck Adapter Plate Reviews


Other Picture


Royal Products 44002 A2-5 Spindle To 170 mm Chuck Adapter Plate Feature

  • Mount an A2-5 chuck on a 170mm Spindle; 1" thick
  • Made from high carbon alloy steel hardened to Rc 48-52
  • High accuracy, 0.0003" TIR guaranteed
  • Drive button and metric screws (for mounting plate to spindle) are included
Adapter plates offer the flexibility to mount collet chucks and 3-jaw chucks to a wider range of spindles. Mount a larger chuck on a smaller spindle for increased capacity. Mount a smaller chuck on a larger spindle for increased tool clearance and higher speeds. Metric screws included for mounting plate to spindle. Drive button is also included. Hardened and ground. Concentricity of 0.0002" TIR guaranteed.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 21, 2011 03:42:04

Tuesday, April 19, 2011

Robert Sorby #89HS10 Thread Cutting Set - 10TPI

Robert Sorby #89HS10 Thread Cutting Set - 10TPI Reviews


Other Picture


This starter package will give you a great foundation for learning to cut threads on turned objects. Thread cutting tools are primarily used to make lidded boxes, but can be used to make other threaded turnings as well. The tools have a unique enhanced helix angle design specifically for use in wood, so you can be assured of smooth and precise results. The Thread Cutters come as a pair that will cut both the male and female threads. Thread Cutters have HSS blades and ash handles. Made in England. Thread Cutting Set: Includes a pair of Thread Cutters; Thread & Sizing Gauge; and the "Focus on Thread Cutting" DVD.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 20, 2011 05:26:04

Monday, April 18, 2011

OneWay Bowl Steady

OneWay Bowl Steady Reviews


Other Picture


OneWay Bowl Steady Feature

  • The Bowl Steady also increases safety
  • Fingers can be removed from the bowl or platter being turned
  • Each model has a clamp block specific to that manufacturer's lathes.
The OneWay Bowl Steady Rest is designed to reduce vibration at the rim of a bowl or platter, thus making turning safer and easier. Even the best lathes cannot stop vibration inherent in the wood, caused by wood flexing. The Bowl Steadys neoprene, ball-bearing wheels reduce vibration, allowing smoother finished projects. Adjustment is easy, just align with the lathes center, squeeze the scissors-like tension arms and tighten down on the wing-nut.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 19, 2011 10:02:04

Saturday, April 16, 2011

Royal Products 43372 1/8" to 3-5/8" Bar Capacity Heavy Duty Bar Puller With 1" Square Shank

Royal Products 43372 1/8" to 3-5/8" Bar Capacity Heavy Duty Bar Puller With 1" Square Shank Reviews


Other Picture


Royal Products 43372 1/8" to 3-5/8" Bar Capacity Heavy Duty Bar Puller With 1" Square Shank Feature

  • Rugged, heavy-duty design withstands the toughest manufacturing environments
  • Large internal die springs provide very strong gripping force
  • All parts subject to wear are hardened for strength and durability
  • 1 year warranty against failure due to manufacturing defects
Bar pullers provide a cost effective way to automate CNC lathes. Unit is very easy to use. Simply set gap between jaws 1⁄8" smaller than stock size. As the bar puller slides over the bar along the x-axis, the fingers flex to provide the gripping force. The turret then retracts along the z axis, pulling the bar out the desired position. Pre-load on internal die springs can be adjusted to fine tune the grip force. Includes one set of standard jaws and one blank spindle bushing. Extra capacity jaws sold separately.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 17, 2011 00:33:04

Friday, April 15, 2011

3/16" Diamond Parting Tool

3/16" Diamond Parting Tool Reviews


Other Picture


3/16" Diamond Parting Tool Feature

  • High-speed steel blade
  • Extra-long 16" hardwood handle
  • Extra-long handle for greater control
  • Woodcraft exclusive design
  • Brass ferrule
These high-quality turning tools are designed to meet the needs of any skill level woodturner, from beginner to demanding professional. High-speed steel blades are hardened to Rc 62-64 and set in extra-long 16" hardwood handles with brass ferrules. Extra length of the handles allows greater control and comfort for those long turning sessions. High-speed steel blades stay sharp up to six times longer than carbon steel. Available exclusively at Woodcraft, these tools represent great value and quality. 6-3/4" blades are set in 16" hardwood handles with brass ferrules. Honing required before use.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 16, 2011 01:13:10

Thursday, April 14, 2011

Robert Sorby #DRCK/2 Hollow Revolving Center Set 2 MT

Robert Sorby #DRCK/2 Hollow Revolving Center Set 2 MT Reviews


Other Picture


An excellent center set for turning small to mid-size projects. The wide assortment of tips adapts to a variety of projects and gets tight in to the base of small parts. Tips are held safely in place with a precision machined taper fit. These accessories make this a highly versatile system which will cater for almost every demand. Can be used on any size lathe that will accept a #2 morse taper. Made in England. Deluxe Set Includes: A Ring Center; Hollow Center; 60 Deg. Point; Mini 60 Deg. Point; Cup Center; Location Pin; and a hand Ejection Tool to remove the various tips. Description of Tips Ring Center - Used when there is a risk of splitting the stock (ie. laminated and small spindle work). Hollow Center - For hollow boring. Allows a 5/16" shell augur to feed through, precisley ensuring accurate boring 60 Deg. Point - The work horse tip. Good for heavy duty applications. Mini 60 Deg. Point - For more delicate work or where access is required at the end of the workpiece. Cup Center - Enables the fitting of homemade support heads for specialized tasks. Location Pin - Used to self-center stock that has been long bored prior to turning


Visit Store Now !!

Detail Products

Detail Reviews




Apr 14, 2011 19:22:13