1-1/4'' X 8 Tpi Insert for Oneway Talon Chuck System

1-1/4'' X 8 Tpi Insert for Oneway Talon Chuck System Reviews

Other Picture

This insert is intended for use with the Oneway Talon Chuck System (pictured, sold separately, Rockler #20761). Adapts the Chuck for use with your specific lathe (consult your owner's manual).

Three inserts are available:
* 3/4'' X 16 Tpi Insert (Rockler #22733)
* 1'' X 8 Tpi Insert (Rockler #22726)
* 1-1/4'' X 8 Tpi Insert (Rockler #21358)

Visit Store Now !!

Detail Products

Detail Reviews

Sep 03, 2011 17:35:03

JET 709519 MIDI Lathe Chuck with 2-Inch Jaws

JET 709519 MIDI Lathe Chuck with 2-Inch Jaws Reviews

Other Picture

JET 709519 MIDI Lathe Chuck with 2-Inch Jaws Feature

• MIDI chuck ideal for smaller lathes up to 12-Inch diameter capacity
• Great for lathes under 12-Inch swing; 1-by-8 Thread Per-Inch
• Light Weight, less strain on spindle
• 2-Inch jaws included
• Takes same accessories as Nova, SuperNova, SuperNova 2 and Nova Titan Chucks

Whether you're new to turning or an old hand at pens, this chuck will give you the capability to add bowls, finials and a variety of vessels to your repertoire.

We like this one by Jet because it's supremely lightweight, and that's good for your lathe's motor, but it's also tough as nails. It expands and contracts smoothly with lever action, expanding to grip the inside diameter of the bottom of a bowl you're gouging or contracting to clamp securely around a dowel threaded through the spindle and destined to be a Shaker-type peg.

The 2-inch jaws are perfect for smaller projects, including bowls, vases, small plates, finials, pegs and other work done on a mini- or midi-lathe. --Kris Jensen-Van Heste Includes Nova™ Midi Chuck - 709519

Visit Store Now !!

Detail Products

• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish
• JET JML 1014VSI 10-Inch-by-14-Inch Variable Speed Indexing Mini Lathe
• PSI Woodworking CJAWFJ2 Jumbo Flat Jaws
• JET 1220VS Mini Lathe

Detail Reviews

Sep 02, 2011 20:14:06

HSS WOOD LATHE CHISEL SET, 8-PIECE SET BY SAVANNAH TURNING TOOLS

HSS WOOD LATHE CHISEL SET, 8-PIECE SET BY SAVANNAH TURNING TOOLS Reviews

Other Picture

HSS WOOD LATHE CHISEL SET, 8-PIECE SET BY SAVANNAH TURNING TOOLS Feature

• THE M2 HIGH SPEED STEEL 5 1/4" BLADES OUTLAST CARBON STEEL 6 TO 1 AND WILL GIVE YOU YEARS OF USE
• SET INCLUDES 8 ESSENTIAL CHISELS, 3/16 PARTING TOOL,
• 5/8" SPEAR SCRAPER, 1" SKEW CHISEL 5/8" SKEW CHISEL
• 5/8" ROUND NOSE SCRAPER, 1/2" BOWL GOUGE. 3/4" SPINDLE GOUGE, 7/8" ROUGHING GOUGE
• COMES WITH BEAUTIFULLY TURNED 10 3/4" HARDWOOD HANDLES IN A WOOD CASE

We have assembled this 8-piece set to satisfy the majority of your turning needs. It is suitable for turners of all skill levels. It is the ideal kit for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. The set includes 8 essential chisels: 3/16-Inch Parting Tool, 5/8-Inch Spear Scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 5/8-Inch Round nose scraper, 1/2-Inch Bowl Gouge, 3/4-Inch Spindle Gouge, 7/8-Inch Roughing Gouge. It also comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box

Visit Store Now !!

Detail Products

• MSA Safety Works 817893 Adjustable Faceshield
• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish
• Big Horn 19053 8-Inch Caliper Set, 3-Piece
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe

Detail Reviews

Sep 01, 2011 08:36:04

Taig Top Slide

Taig Top Slide Reviews

Other Picture

Taig Top Slide Feature

• Brand new
• Top slide (compound) mounts on crosslide for cutting tapers and angles
• A2Z is an Authorized Taig Dealer

Top slide (compound) mounts on crosslide for cutting tapers and angles

Visit Store Now !!

Detail Products

• Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET
• Taig Milling Attachment
• End Mill Set, 6 Piece 4 Flute
• Taig 1017 Lathe Starter Set
• Taig 3 Jaw Chuck

Detail Reviews

Aug 30, 2011 18:40:33

5/8" Double Ended Mastercut Bowl Gouge

5/8" Double Ended Mastercut Bowl Gouge Reviews

Other Picture

5/8" Double Ended Mastercut Bowl Gouge Feature

• Precision ground from CPM 4 HSS Steel
• 5/8 inch is the diameter of the tool
• Constructed from powdered metal for a longer lasting cutting edge
• 10½ inch total flute length
• more tool for your money

This gouge was designed with a big, wide open flute to allow maximum chip flow. The weight and strength needed to take heavy cuts is also present in this flute design. This particular tool comes in a double-ended configuration. This gives you 50% more usable tool, for 30% more cost. With the double ended tool, you have options to how you use the tool:- use a different grind on each end (i.e. two tools in one) or the same grind on each end for ½ as many trips to the grinder. The choice is yours. The steel used to make all tools in the MASTERCUT line is a CPM M4 HSS - a high-tech particle metal. Making our tools from CPM HSS is what truly sets them above the competition. This powder manufacturing process distributes the carbides uniformly throughout the steel. This process prevents the globular, irregular distribution of carbides and alloys as found in conventional HSS. Advantages of having such uniformity in the steel are: easier to sharpen, performs more consistently, &maintains its edge longer (up to 3 times longer). Note: The carbides in this steel are very fine. This means there are more of them on the cutting edge of the tool at all times compared to lower grade steel.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 29, 2011 22:57:04

WoodRiver 60 degrees Ball Bearing Live Tailstock Center #2 Morse Taper

WoodRiver 60 degrees Ball Bearing Live Tailstock Center #2 Morse Taper Reviews

Other Picture

WoodRiver 60 degrees Ball Bearing Live Tailstock Center #2 Morse Taper Feature

• #2 Morse Taper
• Used for holding a workpiece with a hole from 1/8" to 1- 1/8" diameter
• Perfect for pen turning mandrels

WoodRiver 60 degree cone live centers are perfect for pen turning mandrels, weed pots or general turning projects. These heavy duty ball bearing centers can also be used for holding a workpiece with a hole from 1/8" to 1- 1/8" diameter.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 28, 2011 23:53:08

DELTA 46-936 3-Inch Face Plate for Wood Lathes

DELTA 46-936 3-Inch Face Plate for Wood Lathes Reviews

Other Picture

DELTA 46-936 3-Inch Face Plate for Wood Lathes Feature

• 3-inch dia. with 1-inch-8 Thread
• Die cast zinc
• For small and medium face plate work
• 1/2 lb
• Weighs 1/2-pound

Made of reliable die cast zinc, the DELTA 46-936 3-inch Face Plate for Wood Lathes is designed for small and medium face plate work. This 3-inch diameter face plate features right hand threads for use on the inboard side of the lathe. It also comes with pre-drilled holes for easy mounting of the workpiece using wood screws. This face plate fits standard 1-inch, 8-thread-per-inch headstocks.

Visit Store Now !!

Detail Products

• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
• PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT
• MSA Safety Works 817893 Adjustable Faceshield
• Robert Sorby H0491 3/8" Bowl Gouge

Detail Reviews

Aug 27, 2011 18:38:08