Lathe Accessories

Wednesday, April 6, 2011

Robert Sorby #RS2001 RS2000 Basic System

Robert Sorby #RS2001 RS2000 Basic System Reviews

Other Picture

Developed from an original idea by American woodturner, Dennis Stewart, the RS2000 is a very flexible and economically priced system which enables deep vessel hollowing with a minimal waste of stock. The RS2000 System lends itself not just to hollow forms but, with the use of the Slicer, will also produce picture frames and other large rings. And one of the favorite uses of the system is as a corer. Using the Slicer enables you to produce multiple cone shaped blanks from one piece, thereby allowing you to save money by making more economical use of expensive stock. England The Basic RS2000 has all the components shown in the photo, except for parts RS206, RS213, RS215, RS215C, RS220, and RS221. Chatter Tool components and Arm Brace can be added later to bring even more versatility and creative possibilites to the system. Basic RS2000 Includes: Main Handle; Side Handle, Collar, and Stud; Extension Shank; Slicer; Hooker; Swivel Tip Complete; Round End Swivel Tipside End Cut Swivel Tip; 1/2" Dual Purpose Shank; HSS Scraper Blade; Allen Key; Repl. 10 UNF Cap Screw; Diamond Sharpening File; and 1/4" BSW Tee Knob. Comes in a compact mahogony stained and lacquered case fitted with brass clasps and hinges, carrying handle and instruction manual.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 06, 2011 19:17:13

Tuesday, April 5, 2011

3/4 x 16 TPI Self-Centering 4-Jaw Chuck

3/4 x 16 TPI Self-Centering 4-Jaw Chuck Reviews

Other Picture

3/4 x 16 TPI Self-Centering 4-Jaw Chuck Feature

Jaws will expand and grip in a 2-3" dovetailed recess
3/4" x 16 TPI
Self-Centering
Holds round stock between 1-5/8" and 2-3/4" or square billets 1-1/8" to 2-1/8" in size
Chrome-plated body

Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck. Youll appreciate the following features: wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes. Jaws will expand and grip in a 2-3" dovetailed recess in the base of your turning. Simply rotate the chucks outer ring in the opposite direction to firmly hold round stock between 1-5/8" and 2-3/4" or square billets 1-1/8" to 2-1/8" in size. No disassembly or accessories are required to use the accompanying screw chuck, which has a 1-1/8" long right hand thread. Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black. Comes complete with screw center, locking levers, T-handled hex wrench for jaw screws and 8 extra jaw screws. Everything is secure in a fitted plastic storage/carrying case.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 05, 2011 21:56:04

Monday, April 4, 2011

Micro-Mesh 5" Disk Assortment Pack

Micro-Mesh 5" Disk Assortment Pack Reviews

Other Picture

Micro-Mesh 5" Disk Assortment Pack Feature

5" 5 - Hole, hook and loop style
Kit contains 9 grades, 1 each of the following;
Includes 1500, 1800, 2400, 3200, 3500, 4000, 6000, 8000 and 12,000 grit pads
Use with random orbital sander to polish large surfaces in half the time.
Use dry (no need to wet sand)

Micro-Mesh is a unique cushioned abrasive capable of giving very fine and very controlled scratch patterns. The grits range from 1500 to 12000. The 1500 is slightly more coarse than a conventional 600 grit sandpaper and the 12000 will leave scratch patterns that cannot be detected by the human eye. Micro-Mesh abrasives can polish to an optically clear, reflective state or through the use of a more coarse grit, leave a matte or satin finish. Excellent product to use as a final rub for water-based finishes.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 05, 2011 02:33:05

Sunday, April 3, 2011

3MT Medium Duty VME Live Center

3MT Medium Duty VME Live Center Reviews

Other Picture

3MT Medium Duty VME Live Center Feature

Size: 3 Morse Taper
Centers have 60 degree point, and concentricity of +/-0.0004"

Made of finest heat treated steel, with case-hardened housing. Built-in washer to protect bearings from grit and dust. Centers have 60 degree point, and concentricity of +/-0.0004".

Visit Store Now !!

Detail Products

Detail Reviews

Apr 04, 2011 04:06:07

Saturday, April 2, 2011

Behlen Woodturners Finish

Behlen Woodturners Finish Reviews

Other Picture

Behlen Woodturners Finish Feature

Fast drying finish for round wooden objects
Use to create a wet look finish in seconds
A ready to use shellac and resin based formula
Develops a high sheen and rejuvenates most any cured finish
WILL NOT SHIP TO CALIFORNIA

Behlen Woodturners Finish ends the problem of finishing a round wooden surface. No more finishing runs or unfinished or under finished surfaces. It is a ready to use, fast drying, padding finish, especially formulated to finish round wooden objects: spindles, lamp bases, pool cues, pens, etc. Apply and buff while your project is still on the lathe; theres nothing easier or quicker. A long time favorite of serious woodturners, we regularly use Woodturners Finish for pen, pencil, and other small turning projects. This is the secret to producing a professional look for your handcrafted pens and pencils. 16 oz.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 03, 2011 08:44:04

Sorby Micro 1/2" Gouge Blade

Sorby Micro 1/2" Gouge Blade Reviews

Other Picture

Sorby Micro 1/2" Gouge Blade Feature

Work primarily on mini or midi lathes or those who specialize in miniature pieces.
Use for pen turning
Highly popular with woodturners the world over.

Robert Sorby continues to lead the way in innovation with the introduction of the all new Micro Tool System. Turning tools specifically designed for small projects, but perfectly capable of being used on larger projects. The system features beautifully engineered burgundy anodized aluminum handles and is comprised of four separate sets of tools.

Friday, April 1, 2011

5MT Medium Duty VME Live Center

5MT Medium Duty VME Live Center Reviews

Other Picture

5MT Medium Duty VME Live Center Feature

Size: 5 Morse Taper
Centers have 60 degree point, and concentricity of +/-0.0004"

Made of finest heat treated steel, with case-hardened housing. Built-in washer to protect bearings from grit and dust. Centers have 60 degree point, and concentricity of +/-0.0004".