Left Hand Bowl Scraper

Left Hand Bowl Scraper Reviews

Other Picture

Left Hand Bowl Scraper Feature

• High speed steel
• Sharpened edge lasts 6 times longer than carbon steel
• Most efficient shape in producing final surfaces for bowls
• Curved left style blade 7" x 1-1/2" x 3/8"
• 14" ash handle

First introduced by master craftsman Richard Raffan, this shape has been found to be most efficient in producing the final surfaces on bowls. The curved tip with elongated side edges can clean-up rough, irregular cuts left by gouges, and cut a more pleasing curved shape. The curved left style blade is 7" long x 1-1/2" wide x 3/8" thick with 14" ash handle.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 18, 2011 12:47:04

Ci1 Easy Rougher David J. Marks Limited Edition

Ci1 Easy Rougher David J. Marks Limited Edition Reviews

Other Picture

Ci1 Easy Rougher David J. Marks Limited Edition Feature

• Hogs material off effortlessly by transferring cutting pressure directly to the tool rest
• Comes with the standard R4, 4? radius cutter for roughing larger pieces
• Uniquely designed carbide cutters
• Easy grip handle
• 20" Bubinga handle

The beauty of these revolutionary new turning tools is not really the hefty, 15? brightly finished maple handles, but the uniquely designed carbide cutters. Say goodbye to sharpening as these cutters, which add up to 20 additional hours of turning from each of the four-sides, are replaceable once dulled. Secondly, the cutters designed so that you dont have to find the bevel when turning. Simply advance the tool slowly into the work piece and begin cutting straight in, or sweep the cutter from left to right, or right to left. The Ci1 Easy Rougher hogs material off effortlessly by transferring cutting pressure directly to the tool rest and comes with the standard R4, 4? radius cutter for roughing larger pieces. Optional cutters include an R2, 2? radius used for finishing inside bowls under 8? in diameter and a square head cutter for roughing and creating square inside corners.

Visit Store Now !!

Detail Products

• Ci1 Easy Rougher Replacement R2 Radius Cutter

Detail Reviews

Oct 16, 2011 21:32:04

Bowl Rest, Small

Bowl Rest, Small Reviews

Other Picture

Bowl Rest, Small Feature

• Curved tool rest for bowls
• Interference-free hand movement
• Solid steel construction
• Part of the Woodcraft tool rest modular system
• Save money with 2 rests and 1 post

Tired of using a tool rest thats too short, too soft and designed by an engineer that has no idea what its like to even use a lathe? If youd like to spend more time turning instead of tuning, the Woodcraft lathe tool rest system is for you. The solid steel bowl rests provide a stable curve for turning and a flat top for vibration-free scraping. Use the small bowl rest for bowls up to 7" in diameter. Woodcraft tool rests are modular in design to save you money (buy two rests and one post) and permit you to use your rests on more than one lathe. Select the proper diameter post for your lathe and a tool rest in a length or shape to meet your needs. Note: tool rest lengths include threads. Posts screw into rests and can easily be removed and attached to a different accessory.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 19, 2011 08:37:03

Grizzly G7040 Carbide Insert for Steel, LH - For use w/ G7029, G7031 or G7032

Grizzly G7040 Carbide Insert for Steel, LH - For use w/ G7029, G7031 or G7032 Reviews

Other Picture

INSERTS, 5PC STL FOR G7029,31,32

Visit Store Now !!

Detail Products

Detail Reviews

Sep 12, 2011 14:34:03

Sorby Sovereign Bowl Gouge 1/2 in

Sorby Sovereign Bowl Gouge 1/2 in Reviews

Other Picture

Sorby Sovereign Bowl Gouge 1/2 in Feature

• A must in the tool kit of every bowl turner
• Milled from round bar, giving both mass and stability
• These tools are ideal for making bowls
• They can produce either massive profiling cuts or delicate as neccessary.

Sorby Sovereign Bowl Gouge 1/2" to be used with the Sorby Sorvereign System

Visit Store Now !!

Detail Products

Detail Reviews

Sep 11, 2011 04:47:04

PSI Woodworking CSC500 Barracuda Micro Lathe Chuck System

PSI Woodworking CSC500 Barracuda Micro Lathe Chuck System Reviews

Other Picture

PSI Woodworking CSC500 Barracuda Micro Lathe Chuck System Feature

• Weighs only 1.2 pounds with a 2-1/8-inch outside diameter
• Includes step jaws, round jaws, and pin jaws
• Mounts to 3/4-inch-by-16 tpi and also adapts to 1-inch-by-8 tpi
• Holds workpiece from 5/8-to-2-inch inside hole diameter
• Holds dowell from 1/4-to-1-1/2-inch outside diameter

Here is a full-featured and complete 4-jaw chuck system in a small package. It is ideal for cup projects, miniatures and small spindle work. Uses a pair of levers to tighten. Fits Mini, Midi, and Micro LathesWeighs only 1.2 pounds with a 2-1/8-inch outside diameterIncludes step jaws, round jaws, and pin jawsMounts to 3/4-inch-by-16 tpi and also adapts to 1-inch-by-8 tpiHolds workpiece from 5/8-to-2-inch inside hole diameterHolds dowell from 1/4-to-1-1/2-inch outside diameter

Visit Store Now !!

Detail Products

• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• Big Horn 19053 8-Inch Caliper Set, 3-Piece
• PSI Woodworking CJAWFJ2 Jumbo Flat Jaws
• PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
• MSA Safety Works 817893 Adjustable Faceshield

Detail Reviews

Sep 09, 2011 07:10:03

Live Center MT# 3 Taper

Live Center MT# 3 Taper Reviews

Other Picture

Live Center MT# 3 Taper Feature

• Live Center MT#3

Live center

Visit Store Now !!

Detail Products

Detail Reviews

Sep 08, 2011 10:51:06

Woodturning Projects with Rex and Kip Volume 3 DVD

Woodturning Projects with Rex and Kip Volume 3 DVD Reviews

Other Picture

Woodturning Projects with Rex and Kip Volume 3 DVD Feature

• Volume 3 includes Dry Bowl, Bottle Stopper, Fridge Magnet, Game Call and Tool Handle
• Rex and Kip have been turning wood and teaching others for over 50 years
• Fast-paced instruction that focuses on critical procedures
• With minimal time spent on repetitive processes
• Extensive menus make it easy to navigate through the various steps used to make each project

by Rex Burningham and Kip Christensen. WoodTurning Projects with Rex and Kip Volume 3 DVD 1 hour 16 minutes. This series is unique among instructional videos for woodturners. Each video covers several different projects. The instruction is fast paced, focusing on critical procedures, with minimal time spent on repetitive processes. Rex and Kip demonstrate several chucking methods using both commercial chucks and home-made chucks, and they show numerous accessories and various finishes. These videos offer exceptional value by introducing a wide range of projects, techniques, and turning accessories in a relatively short period of time. Each DVD includes extensive menus that make it easy to navigate through the various steps used to make each project.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 07, 2011 13:59:03

Badger Hair Bristle Brush 20mm

Badger Hair Bristle Brush 20mm Reviews

Other Picture

Badger Hair Bristle Brush 20mm Feature

• 100% Badger hair
• Shaving brush
• 20mm
• Holds a significant amount of water
• Creates a great lather

The modern shaving brush can be traced back to France to the 1750s. While the overall design has changed very little since, their popularity has not diminished. Our 20mm shaving brush insert is made from 100 badger hair traditionally known to hold significant amounts of water when mixed with shaving soap is known to create a great lather. Great shaving starts here.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 05, 2011 18:19:04

1-1/4'' X 8 Tpi Insert for Oneway Talon Chuck System

1-1/4'' X 8 Tpi Insert for Oneway Talon Chuck System Reviews

Other Picture

This insert is intended for use with the Oneway Talon Chuck System (pictured, sold separately, Rockler #20761). Adapts the Chuck for use with your specific lathe (consult your owner's manual).

Three inserts are available:
* 3/4'' X 16 Tpi Insert (Rockler #22733)
* 1'' X 8 Tpi Insert (Rockler #22726)
* 1-1/4'' X 8 Tpi Insert (Rockler #21358)

Visit Store Now !!

Detail Products

Detail Reviews

Sep 03, 2011 17:35:03

JET 709519 MIDI Lathe Chuck with 2-Inch Jaws

JET 709519 MIDI Lathe Chuck with 2-Inch Jaws Reviews

Other Picture

JET 709519 MIDI Lathe Chuck with 2-Inch Jaws Feature

• MIDI chuck ideal for smaller lathes up to 12-Inch diameter capacity
• Great for lathes under 12-Inch swing; 1-by-8 Thread Per-Inch
• Light Weight, less strain on spindle
• 2-Inch jaws included
• Takes same accessories as Nova, SuperNova, SuperNova 2 and Nova Titan Chucks

Whether you're new to turning or an old hand at pens, this chuck will give you the capability to add bowls, finials and a variety of vessels to your repertoire.

We like this one by Jet because it's supremely lightweight, and that's good for your lathe's motor, but it's also tough as nails. It expands and contracts smoothly with lever action, expanding to grip the inside diameter of the bottom of a bowl you're gouging or contracting to clamp securely around a dowel threaded through the spindle and destined to be a Shaker-type peg.

The 2-inch jaws are perfect for smaller projects, including bowls, vases, small plates, finials, pegs and other work done on a mini- or midi-lathe. --Kris Jensen-Van Heste Includes Nova™ Midi Chuck - 709519

Visit Store Now !!

Detail Products

• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish
• JET JML 1014VSI 10-Inch-by-14-Inch Variable Speed Indexing Mini Lathe
• PSI Woodworking CJAWFJ2 Jumbo Flat Jaws
• JET 1220VS Mini Lathe

Detail Reviews

Sep 02, 2011 20:14:06

HSS WOOD LATHE CHISEL SET, 8-PIECE SET BY SAVANNAH TURNING TOOLS

HSS WOOD LATHE CHISEL SET, 8-PIECE SET BY SAVANNAH TURNING TOOLS Reviews

Other Picture

HSS WOOD LATHE CHISEL SET, 8-PIECE SET BY SAVANNAH TURNING TOOLS Feature

• THE M2 HIGH SPEED STEEL 5 1/4" BLADES OUTLAST CARBON STEEL 6 TO 1 AND WILL GIVE YOU YEARS OF USE
• SET INCLUDES 8 ESSENTIAL CHISELS, 3/16 PARTING TOOL,
• 5/8" SPEAR SCRAPER, 1" SKEW CHISEL 5/8" SKEW CHISEL
• 5/8" ROUND NOSE SCRAPER, 1/2" BOWL GOUGE. 3/4" SPINDLE GOUGE, 7/8" ROUGHING GOUGE
• COMES WITH BEAUTIFULLY TURNED 10 3/4" HARDWOOD HANDLES IN A WOOD CASE

We have assembled this 8-piece set to satisfy the majority of your turning needs. It is suitable for turners of all skill levels. It is the ideal kit for turning small pens, spindles, bowls and larger projects. The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use. The set includes 8 essential chisels: 3/16-Inch Parting Tool, 5/8-Inch Spear Scraper, 1-Inch Skew Chisel, 5/8-Inch Skew Chisel, 5/8-Inch Round nose scraper, 1/2-Inch Bowl Gouge, 3/4-Inch Spindle Gouge, 7/8-Inch Roughing Gouge. It also comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box

Visit Store Now !!

Detail Products

• MSA Safety Works 817893 Adjustable Faceshield
• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish
• Big Horn 19053 8-Inch Caliper Set, 3-Piece
• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe

Detail Reviews

Sep 01, 2011 08:36:04

Taig Top Slide

Taig Top Slide Reviews

Other Picture

Taig Top Slide Feature

• Brand new
• Top slide (compound) mounts on crosslide for cutting tapers and angles
• A2Z is an Authorized Taig Dealer

Top slide (compound) mounts on crosslide for cutting tapers and angles

Visit Store Now !!

Detail Products

• Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET
• Taig Milling Attachment
• End Mill Set, 6 Piece 4 Flute
• Taig 1017 Lathe Starter Set
• Taig 3 Jaw Chuck

Detail Reviews

Aug 30, 2011 18:40:33

5/8" Double Ended Mastercut Bowl Gouge

5/8" Double Ended Mastercut Bowl Gouge Reviews

Other Picture

5/8" Double Ended Mastercut Bowl Gouge Feature

• Precision ground from CPM 4 HSS Steel
• 5/8 inch is the diameter of the tool
• Constructed from powdered metal for a longer lasting cutting edge
• 10½ inch total flute length
• more tool for your money

This gouge was designed with a big, wide open flute to allow maximum chip flow. The weight and strength needed to take heavy cuts is also present in this flute design. This particular tool comes in a double-ended configuration. This gives you 50% more usable tool, for 30% more cost. With the double ended tool, you have options to how you use the tool:- use a different grind on each end (i.e. two tools in one) or the same grind on each end for ½ as many trips to the grinder. The choice is yours. The steel used to make all tools in the MASTERCUT line is a CPM M4 HSS - a high-tech particle metal. Making our tools from CPM HSS is what truly sets them above the competition. This powder manufacturing process distributes the carbides uniformly throughout the steel. This process prevents the globular, irregular distribution of carbides and alloys as found in conventional HSS. Advantages of having such uniformity in the steel are: easier to sharpen, performs more consistently, &maintains its edge longer (up to 3 times longer). Note: The carbides in this steel are very fine. This means there are more of them on the cutting edge of the tool at all times compared to lower grade steel.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 29, 2011 22:57:04

WoodRiver 60 degrees Ball Bearing Live Tailstock Center #2 Morse Taper

WoodRiver 60 degrees Ball Bearing Live Tailstock Center #2 Morse Taper Reviews

Other Picture

WoodRiver 60 degrees Ball Bearing Live Tailstock Center #2 Morse Taper Feature

• #2 Morse Taper
• Used for holding a workpiece with a hole from 1/8" to 1- 1/8" diameter
• Perfect for pen turning mandrels

WoodRiver 60 degree cone live centers are perfect for pen turning mandrels, weed pots or general turning projects. These heavy duty ball bearing centers can also be used for holding a workpiece with a hole from 1/8" to 1- 1/8" diameter.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 28, 2011 23:53:08

DELTA 46-936 3-Inch Face Plate for Wood Lathes

DELTA 46-936 3-Inch Face Plate for Wood Lathes Reviews

Other Picture

DELTA 46-936 3-Inch Face Plate for Wood Lathes Feature

• 3-inch dia. with 1-inch-8 Thread
• Die cast zinc
• For small and medium face plate work
• 1/2 lb
• Weighs 1/2-pound

Made of reliable die cast zinc, the DELTA 46-936 3-inch Face Plate for Wood Lathes is designed for small and medium face plate work. This 3-inch diameter face plate features right hand threads for use on the inboard side of the lathe. It also comes with pre-drilled holes for easy mounting of the workpiece using wood screws. This face plate fits standard 1-inch, 8-thread-per-inch headstocks.

Visit Store Now !!

Detail Products

• PSI LCENTLT2 No. 2MT Heavy Duty Live Lathe Center
• PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
• PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT
• MSA Safety Works 817893 Adjustable Faceshield
• Robert Sorby H0491 3/8" Bowl Gouge

Detail Reviews

Aug 27, 2011 18:38:08

Ci2 Mini Rougher

Ci2 Mini Rougher Reviews

Other Picture

Ci2 Mini Rougher Feature

• These mini tools feature all of the same benefits and qualities as their full size parents. T
• You will find these tools invaluable for those smaller more intricate turnings, such as pens
• roughing, finishing and detail work.
• Easy grip handle

Easy Wood Tool Minis - Easy wood has done it again! These mini tools feature all of the same benefits and qualities as their full size parents. The cutters are designed so that you do not have to find the bevel when turning. Simply advance the tool slowly into the work piece and begin cutting straight in, or sweep the cutter from left to right, or right to left. You will find these tools invaluable for those smaller more intricate turnings, such as pens, ornaments and smaller bowls, but they are ideal for roughing, finishing and detail work.

Visit Store Now !!

Detail Products

• Ci3 Mini Finisher
• Ci4 Mini Detailer
• Ci3 Mini Finisher Replacement Carbide Cutter
• Ci2 Easy Rougher Mini Replacement Cutter
• Ci1 Easy Rougher Replacement R2 Radius Cutter

Detail Reviews

Aug 25, 2011 21:53:08